Product Description
Dental product instruments low noise dental compressor/dental air compressor
Product Description
Feature:
– Air pump up to 3,000hours work time, the longest life air compressor in the world.
– Low noise and vibration air pump,keep slient work enviroment, make good mood to both dentist and
patient.kill patient’s nerves.
– Famous brand water filter,dry and clean air,offer green air to avoaid cross-infection.
– Air tank have internal oxidation-proofed precess,360° protect air pump and offer hygiene air even dentist
forgot to drain away the water.
– Instead of plastic pipe, top quality metal pipe to avoaid explose.
– Rubber Foot keep the air compressor away from wet place and reduce vibration
Product Parameters
| Product Parameter | |
| One for one | Air Compressor (one for one) |
| • Rated Voltage: 220VAC 50Hz | |
| • Current: 2.8A | |
| • Power: 550W | |
| • Volume Flow: 70L/ min | |
| • Actuating Pressure: 0.5Mpa | |
| •Rated exhaust pressure:0.77Mpa | |
| • Gas Holder Volume: 32L | |
| • Noise: 55- 62dB | |
| One for two | • Rated voltage: 220VAC 50Hz |
| • Current: 3.7A | |
| • Power: 840W | |
| • Volume flow: 105L/ min | |
| • Actuating pressure: 0.5Mpa | |
| • Rated exhaust pressure: 0.77Mpa | |
| • Gas holder volume: 40L | |
| • Noise: 58-64dB | |
| One for three | •Rated Voltage: 220VAC 50Hz |
| •Current: 5.6A | |
| •Power 1100W | |
| •Volume flow: 140L/ min | |
| •Actuating pressure: 0.5 Mpa | |
| •Rated exhaust pressure: 0.77Mpa | |
| •Gas holder volume: 60L | |
| •Noise: 65-75dB | |
| One for four | • Rated Voltage: 220VAC 50Hz |
| • Current: 11.2A | |
| • Power: 1680W | |
| • Volume Flow: 200L/ min | |
| • Actuating Pressure: 0.5Mpa | |
| •Rated exhaust pressure:0.77Mpa | |
| • Gas Holder Volume: 60L | |
| • Noise: 80-85dB | |
| One for six | • Rated Voltage: 220VAC 50Hz; |
| • Current: 11.4A; | |
| • Power: 2520W; | |
| • Volume Flow: 300L/ min; | |
| • Actuating Pressure: 0.8Mpa; | |
| •Rated exhaust pressure:0.77Mpa | |
| • Gas Holder Volume: 90L; | |
| • Noise: 80-85dB | |
Detailed Photos
Working Shop
Advantage:
Oil Free: Compare to lubrication compressor, one-step operation, do not need any lubricated oil, and harmless to the human body, more health and hygiene.
Super Silent: Noise level lower than 60dB, ensure have friendly-enviromently treating room.
Multi-Phase Filteration: Advanced branded water filter to ensure extremely green and dry air.
Easy Using: One-step operation, when connecting with power, air compressor work automatic, also equipped with thermal prevention deviceto avoid over heating to protect motors.
Green Air: Air tank have internal oxidation-proofed precess,avoaid corrosion and supply hygiene air to the equipments.
Energy Saving: High quality pressure switch used to control the power of air compressor automatically stop when reach max pressure, and restart at mix pressure.
Low Vibration: Robber foot reduce vibration and keep the air compressor away from wet place.
High Duability: long life air pump up to 3,000 hours working time.
Simple Operation: No need to lubricate oil.
Applications:
Dental clinic, medical and health, SPA, Tattoo house, scientific research, electronic, chemical, Laboratory, spraying, Industrial, Printing etc.
FAQ
Q1: Are you a manufacture or a trading company?
A: Mydent Dental is 1 of the professional manufacture of dental equipment in China for 15 years. Our products also have been awarded the CE and ISO certificate.
Q2: How long is the warranty and what does it cover?
A: All of dental chair has 1 year warranty, if having any problem, you can send us the pictures or videos, we will send you the parts for free as the replacement within the first year.
Q3: Do you test all your goods before delivery?
A: Yes, we have strictly test twice before delivery
Q4: Where is Mydent Dental Company?
A: We are located in the southern of China, HangZhou City, near to HangZhou. Warmly welcome to visit us!
Q5: What is your terms of payment?
A: 1.For large quantity, 30% T/T or Western Union deposit payment before production, 70% balance must be paid before shipment
2.For few amount, full payment should be made within 5 working days of placing your order.
Q6: How can I get EXW or C&F price?
A: If you are sourcing a product, welcome to send us email or call us and inform which country are you from, our regional representative will send you specific information. Normally production time of our products is from 1 week to 2 weeks depending on the quantity ordered.
Company Profile
HangZhou Mydent Medical Instrument Co., Ltd is profectional enterprise of manufacture, production and sale of dental equipment and mateiral.
We supply full range of the dental products including dental unit and its accessories, LED curing light, dental handpiece, CHINAMFG burs, endo files, oiless air compressor, orthodontic instruments and material and so on.
Competitive price, good quality, on-time delivery and good service it′ S our tenet. We wants to be your reliable business parter and faithful friend in China. Also we are looking CHINAMFG a long time business with you and your company!
Contact
Contact person : CHINAMFG
Add :423# jiebian RoadLuocun Shishan Town, Xihu (West Lake) Dis. District, HangZhou /* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Interface: | 4 Holes |
|---|---|
| Teeth Whitening Method: | Laser Whitening |
| Applicable Departments: | Orthodontic Department |
| Certification: | ISO |
| Type: | Medical Silent Oil-Free Air Compressor |
| Material: | Metal |
.webp)
Can air compressors be used for shipbuilding and maritime applications?
Air compressors are widely used in shipbuilding and maritime applications for a variety of tasks and operations. The maritime industry relies on compressed air for numerous essential functions. Here’s an overview of how air compressors are employed in shipbuilding and maritime applications:
1. Pneumatic Tools and Equipment:
Air compressors are extensively used to power pneumatic tools and equipment in shipbuilding and maritime operations. Pneumatic tools such as impact wrenches, drills, grinders, sanders, and chipping hammers require compressed air to function. The versatility and power provided by compressed air make it an ideal energy source for heavy-duty tasks, maintenance, and construction activities in shipyards and onboard vessels.
2. Painting and Surface Preparation:
Air compressors play a crucial role in painting and surface preparation during shipbuilding and maintenance. Compressed air is used to power air spray guns, sandblasting equipment, and other surface preparation tools. Compressed air provides the force necessary for efficient and uniform application of paints, coatings, and protective finishes, ensuring the durability and aesthetics of ship surfaces.
3. Pneumatic Actuation and Controls:
Air compressors are employed in pneumatic actuation and control systems onboard ships. Compressed air is used to operate pneumatic valves, actuators, and control devices that regulate the flow of fluids, control propulsion systems, and manage various shipboard processes. Pneumatic control systems offer reliability and safety advantages in maritime applications.
4. Air Start Systems:
In large marine engines, air compressors are used in air start systems. Compressed air is utilized to initiate the combustion process in the engine cylinders. The compressed air is injected into the cylinders to turn the engine’s crankshaft, enabling the ignition of fuel and starting the engine. Air start systems are commonly found in ship propulsion systems and power generation plants onboard vessels.
5. Pneumatic Conveying and Material Handling:
In shipbuilding and maritime operations, compressed air is used for pneumatic conveying and material handling. Compressed air is utilized to transport bulk materials, such as cement, sand, and grain, through pipelines or hoses. Pneumatic conveying systems enable efficient and controlled transfer of materials, facilitating construction, cargo loading, and unloading processes.
6. Air Conditioning and Ventilation:
Air compressors are involved in air conditioning and ventilation systems onboard ships. Compressed air powers air conditioning units, ventilation fans, and blowers, ensuring proper air circulation, cooling, and temperature control in various ship compartments, cabins, and machinery spaces. Compressed air-driven systems contribute to the comfort, safety, and operational efficiency of maritime environments.
These are just a few examples of how air compressors are utilized in shipbuilding and maritime applications. Compressed air’s versatility, reliability, and convenience make it an indispensable energy source for various tasks and systems in the maritime industry.
.webp)
Can air compressors be used for inflating tires and sporting equipment?
Yes, air compressors can be used for inflating tires and sporting equipment, providing a convenient and efficient method for achieving the desired air pressure. Here’s how air compressors are used for these purposes:
1. Tire Inflation:
Air compressors are commonly used for inflating vehicle tires, including car tires, motorcycle tires, bicycle tires, and even larger truck or trailer tires. Air compressors provide a continuous source of pressurized air, allowing for quick and accurate inflation. They are often used in automotive repair shops, gas stations, and by individuals who regularly need to inflate tires.
2. Sporting Equipment Inflation:
Air compressors are also useful for inflating various types of sporting equipment. This includes inflatable balls such as soccer balls, basketballs, footballs, and volleyballs. Additionally, air compressors can be used to inflate inflatable water toys, air mattresses, inflatable kayaks, and other recreational items that require air for proper inflation.
3. Air Tools for Inflation:
Air compressors can power air tools specifically designed for inflation purposes. These tools, known as inflators or air blow guns, provide controlled airflow for inflating tires and sporting equipment. They often have built-in pressure gauges and nozzles designed to fit different types of valves, making them versatile and suitable for various inflation tasks.
4. Adjustable Pressure:
One advantage of using air compressors for inflation is the ability to adjust the pressure. Most air compressors allow users to set the desired pressure level using a pressure regulator or control knob. This feature ensures that tires and sporting equipment are inflated to the recommended pressure, promoting optimal performance and safety.
5. Efficiency and Speed:
Air compressors provide a faster and more efficient inflation method compared to manual pumps. The continuous supply of compressed air allows for quick inflation, reducing the time and effort required to inflate tires and sporting equipment manually.
6. Portable Air Compressors:
For inflating tires and sporting equipment on the go, portable air compressors are available. These compact and lightweight compressors can be easily carried in vehicles or taken to sports events and outdoor activities, ensuring convenient access to a reliable air supply.
It is important to note that when using air compressors for inflating tires, it is recommended to follow manufacturer guidelines and proper inflation techniques to ensure safety and avoid overinflation.
Are there air compressors specifically designed for high-pressure applications?
Yes, there are air compressors specifically designed for high-pressure applications. These compressors are engineered to generate and deliver compressed air at significantly higher pressures than standard air compressors. Here are some key points about high-pressure air compressors:
1. Pressure Range: High-pressure air compressors are capable of producing compressed air at pressures typically ranging from 1000 to 5000 psi (pounds per square inch) or even higher. This is considerably higher than the typical range of 100 to 175 psi for standard air compressors.
2. Construction: High-pressure aircompressors feature robust construction and specialized components to withstand the higher pressures involved. They are designed with reinforced cylinders, pistons, valves, and seals that can handle the increased stress and prevent leaks or failures under high-pressure conditions.
3. Power: Generating high-pressure compressed air requires more power than standard compressors. High-pressure air compressors often have larger motors or engines to provide the necessary power to achieve the desired pressure levels.
4. Applications: High-pressure air compressors are utilized in various industries and applications where compressed air at elevated pressures is required. Some common applications include:
- Industrial manufacturing processes that involve high-pressure air for operations such as air tools, pneumatic machinery, and equipment.
- Gas and oil exploration and production, where high-pressure air is used for well drilling, well stimulation, and enhanced oil recovery techniques.
- Scuba diving and underwater operations, where high-pressure air is used for breathing apparatus and underwater tools.
- Aerospace and aviation industries, where high-pressure air is used for aircraft systems, testing, and pressurization.
- Fire services and firefighting, where high-pressure air compressors are used to fill breathing air tanks for firefighters.
5. Safety Considerations: Working with high-pressure air requires adherence to strict safety protocols. Proper training, equipment, and maintenance are crucial to ensure the safe operation of high-pressure air compressors. It is important to follow manufacturer guidelines and industry standards for high-pressure applications.
When selecting a high-pressure air compressor, consider factors such as the desired pressure range, required flow rate, power source availability, and the specific application requirements. Consult with experts or manufacturers specializing in high-pressure compressed air systems to identify the most suitable compressor for your needs.
High-pressure air compressors offer the capability to meet the demands of specialized applications that require compressed air at elevated pressures. Their robust design and ability to deliver high-pressure air make them essential tools in various industries and sectors.
editor by CX 2024-02-09
China manufacturer Low Noise Cheap Price Portable Dental Silent Air Compressor Oil Free for 4 Dental Chairs Use arb air compressor
Product Description
Product Description
| For Dental Chair | 4 |
| Power: | 1600 W |
| Speed: | 1400-1500 r.p.m |
| Air Flow: | 310 L/min at 0 Bar |
| Noise Level: | 52 dB |
| Max Pressure: | 8 Bar |
| Restart Pressure: | 5 Bar |
| Product Size: | L700*W400*H720 mm |
| Net/Gross weight: | 51KG/63 KG |
| Tank Capacity: | 60 L |
| Color: | Green, white |
| Advantages: | 1. Fashion and durable design. Air compressor, compact structure, light weight; under normal situation, the compressor can be used for more than 10000 hours. |
| 2. Tank inside have been done anti-rust treatment, make sure pure output air flow. | |
| 3. Core technology. Air compressor, CHINAMFG hardness cylinder ensure durable working performance. | |
| 4. Use safety, air compressor, with multiple self protection system, if here wil be abnormal with pressure,current or voltage, the motor would cut off automatically to ensure equipment and personal safety. | |
| 5. Air dryer as optional accessories, keep drying and sterilization functions, can be as an optional system according to the request for high quality air flow supply. This integrated adsorption air dryer system, with nice drying effect,can support the dew point at -40ºC | |
| 6. Super silent, could equip with metal silent cabinet, keep very quiet working noise, and then can be used at any indoor workplace, such as research institutes, laboratories, hospitals, offices, students classroom, family, etc. | |
| 7. Small floor space, easy to use and maintain, without any cumbersome installation, connect to correct electric power supply and start the air compressor is OK. | |
| 8. Automatic drainage, starting up and outage of power, water draining are controlled by full- automatic system. |
Recommend Product
Company Information
Certifications
Packaging & Shipping
FAQ
Q1. How do I order from you?
A1. We will make quotation after you send us your purchase plan (including product name, model and quantity). If you agree with the quotation, please send us your company name, address and telephone for goods delivery. We will make proforma invoice and inform you the payment way. Goods delivery details will also be informed accordingly.
Q2.What is your payment term ?
A2: We can accept T/T ,Paypal and Western union for small order or samples order.
Q3. How long is your delivery time?
A3. Generally it is 7-15 days if the goods are in stock. or it is 15-30 days if the goods are not in stock, it is according to quantity.
Q4.how about the quality for your product?
A4:we are very good quality,we make high quality and brand in the word.we make sure all products delivery check every one.
Q5: Do you offer guarantee for the products?
A5: Yes, we offer 1 year warranty to our products.
/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Certification: | ISO, CCC, ISO9001, GMP, Fsc |
|---|---|
| Type: | Dental Air Compressor |
| Material: | Metal |
| Warranty: | 1 Year |
| Trademark: | TuoKang Medical |
| Origin: | China |
| Customization: |
Available
|
|
|---|
.webp)
Can air compressors be used for painting and sandblasting?
Yes, air compressors can be used for both painting and sandblasting applications. Here’s a closer look at how air compressors are utilized for painting and sandblasting:
Painting:
Air compressors are commonly used in painting processes, especially in automotive, industrial, and construction applications. Here’s how they are involved:
- Spray Guns: Air compressors power spray guns used for applying paint coatings. The compressed air atomizes the paint, creating a fine mist that can be evenly sprayed onto surfaces. The pressure and volume of the compressed air impact the spray pattern, coverage, and overall finish quality.
- Paint Mixers and Agitators: Compressed air is often used to power mixers and agitators that ensure proper blending of paint components. These devices use the compressed air to stir or circulate the paint, preventing settling and maintaining a consistent mixture.
- Airbrushing: Air compressors are essential for airbrushing techniques, which require precise control over airflow and pressure. Airbrushes are commonly used in artistic applications, such as illustrations, murals, and fine detailing work.
Sandblasting:
Air compressors play a crucial role in sandblasting operations, which involve propelling abrasive materials at high velocity to clean, etch, or prepare surfaces. Here’s how air compressors are used in sandblasting:
- Blasting Cabinets: Air compressors power blasting cabinets or booths, which are enclosed spaces where the sandblasting process takes place. The compressed air propels the abrasive media, such as sand or grit, through a nozzle or gun, creating a forceful stream that impacts the surface being treated.
- Abrasive Blasting Pots: Air compressors supply air to abrasive blasting pots or tanks that store and pressurize the abrasive media. The compressed air from the compressor enters the pot, pressurizing it and allowing for a controlled release of the abrasive material during the sandblasting process.
- Air Dryers and Filters: In sandblasting applications, it is crucial to have clean, dry air to prevent moisture and contaminants from affecting the abrasive blasting process and the quality of the surface being treated. Air compressors may be equipped with air dryers and filters to remove moisture, oil, and impurities from the compressed air.
When using air compressors for painting or sandblasting, it is important to consider factors such as the compressor’s pressure and volume output, the specific requirements of the application, and the type of tools or equipment being used. Consult the manufacturer’s guidelines and recommendations to ensure the air compressor is suitable for the intended painting or sandblasting tasks.
Proper safety measures, such as wearing protective gear and following established protocols, should always be followed when working with air compressors for painting and sandblasting applications.
.webp)
How are air compressors utilized in pneumatic tools?
Air compressors play a crucial role in powering and operating pneumatic tools. Here’s a detailed explanation of how air compressors are utilized in pneumatic tools:
Power Source:
Pneumatic tools rely on compressed air as their power source. The air compressor generates and stores compressed air, which is then delivered to the pneumatic tool through a hose or piping system. The compressed air provides the force necessary for the tool to perform various tasks.
Air Pressure Regulation:
Air compressors are equipped with pressure regulation systems to control the output pressure of the compressed air. Different pneumatic tools require different air pressure levels to operate optimally. The air compressor’s pressure regulator allows users to adjust the output pressure according to the specific requirements of the pneumatic tool being used.
Air Volume and Flow:
Air compressors provide a continuous supply of compressed air, ensuring a consistent air volume and flow rate for pneumatic tools. The air volume is typically measured in cubic feet per minute (CFM) and determines the tool’s performance capabilities. Higher CFM ratings indicate that the pneumatic tool can deliver more power and operate at a faster rate.
Tool Actuation:
Pneumatic tools utilize compressed air to actuate their mechanical components. For example, an air-powered impact wrench uses compressed air to drive the tool’s internal hammer mechanism, generating high torque for fastening or loosening bolts and nuts. Similarly, air-powered drills, sanders, nail guns, and spray guns rely on compressed air to power their respective operations.
Versatility:
One of the significant advantages of pneumatic tools is their versatility, and air compressors enable this flexibility. A single air compressor can power a wide range of pneumatic tools, eliminating the need for separate power sources for each tool. This makes pneumatic tools a popular choice in various industries, such as automotive, construction, manufacturing, and woodworking.
Portability:
Air compressors come in different sizes and configurations, offering varying degrees of portability. Smaller portable air compressors are commonly used in applications where mobility is essential, such as construction sites or remote locations. The portability of air compressors allows pneumatic tools to be used in various work environments without the constraints of being tethered to a fixed power source.
Overall, air compressors are integral to the functionality and operation of pneumatic tools. They provide the necessary power, air pressure regulation, and continuous airflow required for pneumatic tools to perform a wide range of tasks efficiently and effectively.
.webp)
In which industries are air compressors widely used?
Air compressors find extensive usage across various industries due to their versatility and ability to generate compressed air. Here are some industries where air compressors are widely employed:
1. Manufacturing: Air compressors are essential in manufacturing processes for powering pneumatic tools and equipment. They are used for tasks such as operating assembly lines, powering robotic machinery, running paint sprayers, and driving pneumatic actuators.
2. Construction: Air compressors play a crucial role in the construction industry. They power pneumatic tools like jackhammers, nail guns, impact wrenches, and concrete breakers. Compressed air is also used for concrete spraying, sandblasting, and operating air-powered lifts and hoists.
3. Automotive: Air compressors are widely used in automotive manufacturing and repair. They power air tools used in auto body shops, tire inflation equipment, pneumatic lifts, and air-operated brake systems. Compressed air is also utilized in vehicle painting and drying processes.
4. Oil and Gas: The oil and gas industry extensively relies on air compressors for various applications. They are used for pneumatic drilling, powering pneumatic tools in refineries and petrochemical plants, operating pneumatic valves and actuators, and providing instrument air for control systems.
5. Food and Beverage: Air compressors are employed in the food and beverage industry for tasks such as packaging, bottling, and sealing. They power pneumatic conveying systems, control air pressure in food processing equipment, and provide clean compressed air for food handling and storage.
6. Pharmaceutical and Healthcare: Air compressors find application in pharmaceutical manufacturing and healthcare facilities. They are used for operating medical equipment, such as ventilators and dental tools. Compressed air is also utilized in pharmaceutical processes, including tablet coating, fluid bed drying, and aseptic packaging.
7. Aerospace: The aerospace industry relies on air compressors for various applications, including aircraft maintenance and assembly. They power pneumatic tools for aircraft repair, provide compressed air for cleaning and pressurizing systems, and support ground operations, such as tire inflation and aircraft de-icing.
8. Mining: Air compressors are extensively used in the mining industry. They power pneumatic tools for drilling, rock blasting, and excavation. Compressed air is also utilized for ventilation, conveying materials, and operating underground equipment.
9. Energy and Utilities: Air compressors play a vital role in the energy and utilities sector. They are used in power generation plants for pneumatic control systems, instrument air, and operating pneumatic valves. Compressed air is also employed for cleaning and maintenance purposes.
These are just a few examples of the industries where air compressors are widely utilized. The versatility and reliability of air compressors make them indispensable in numerous applications across diverse sectors.
editor by CX 2024-01-12
China factory CHINAMFG Factory Direct Sale Air Compressor with Wheel Wh31/25 Mobile Compressor Low Noise Operation 12v air compressor
Product Description
Product Parameters
|
LGZJ-31/25-35/18 |
|
|
Pressure (MPa) |
2.5 ~ 1.8 |
|
Air displacement (m3/min) |
31 ~ 35 |
|
Diesel Engine Power (HP) |
Yuchai: 400 |
|
Air outlet size |
G2 * 1,G3/4*1 |
|
Weight (kg) |
4100 |
|
Dimensions (mm) |
3650*2000*2200 |
|
Model of a diesel screw air compressor in a water well |
Exhaust pressure |
Air Freight |
Engine Power |
Exhaust outlets |
Weight |
Dimensions |
|
KSZJ-15/15 |
15 |
15 |
Yuchai 190 horsepower |
G2 * 1,G3/4*1 |
2100 |
2600*1520*1800 |
|
KSZJ-18/17A |
17 |
18 |
Yuchai 220 horsepower |
G2 * 1,G3/4*1 |
2200 |
2800*1520*1780 |
|
KSZJ-18/17 |
17 |
18 |
Yuchai 260 horsepower |
G2 * 1,G3/4*1 |
2700 |
3050*1800 |
|
KSZJ-29/23G |
23 |
29 |
Yuchai 400 horsepower |
G2 * 1,G3/4*1 |
4050 |
3500*1950*2030 |
|
KSZJ-29/23-32/17 |
17-23 |
29-32 |
Yuchai 400 horsepower |
G2 * 1,G3/4*1 |
4050 |
3500*1950*2030 |
|
LGZJ-31/25-35/18 |
18-25 |
31-35 |
Yuchai 400 horsepower |
G2 * 1,G3/4*1 |
4100 |
3650*2000*2200 |
|
LGZJ-35/25-38/20 |
20-25 |
35-38 |
Yuchai 550 horsepower |
G2 * 1,G3/4*1 |
4500 |
3500*1950*2320 |
|
LGZJ-35/25-38/20K |
20-25 |
35-38 |
550 horsepower |
G2 * 1,G3/4*1 |
4500 |
3500*1950*2200 |
|
LGZJ-36/30-41/20 |
20-30 |
36-41 |
Yuchai 560 horsepower |
G2 * 1,G3/4*1 |
6000 |
3800*2160*2300 |
|
LGZJ-36/30-41/20K |
20-30 |
36-41 |
550 horsepower |
G2 * 1,G3/4*1 |
5800 |
3800*2160*2330 |
|
LGZJ-30/35-35/25 |
25-35 |
30-35 |
Yuchai 560 horsepower |
G2 * 1,G3/4*1 |
6000 |
3800*2160*2300 |
|
LGZJ-30/35-35/25K |
25-35 |
30-35 |
550 horsepower |
G2 * 1,G3/4*1 |
5800 |
3800*2160*2330 |
|
LGCG-43/25-37/35 |
25-35 |
43-35 |
Yuchai 775 horsepower |
G2 * 1,G3/4*1 |
7000 |
4160*2200*2257 |
Product Description
SKY screw mainframe
Designed according to the pressure of 40bar: rotor profile, high efficiency, flexible design corresponding to the lifting valve, heavy duty design, bearing, better design, high reliability
Heavy-duty diesel engine
Supporting Yuchai, other countries 3 heavy-duty diesel engines. Achieve engine operation within the full range of combustion state. The product has higher reliability, stronger power, and better fuel economy
Computer control system
The whole process displays operating parameters such as running speed, gas supply pressure, oil pressure, exhaust temperature, coolant temperature, and fuel level. With self-diagnosis fault, alarm and shutdown functions, to ensure the safe operation of the machine when unattended.
Cooling system of
The new results of the North American research and development center ensure that the compressor is always in the running state. The vertical oil, water and air coolers with large diameter fans are designed to adapt to cold and hot weather.
Triple filtration system
Air filtration system: Patented, maintenance-free centrifugal air prefilter filters more than 90% of dust and impurities, so that the filter element maintenance and replacement cycle is extended by 5 times; The precision filter layer of the cyclone main air filter removes the remaining dust to ensure that the machine does not wear out, and the safety filter element can make the machine do not stop the air filter maintenance to ensure the safe operation of the machine. Suitable for continuous operation in desert, dusty and other harsh environment;
Oil and gas separation system: reduce the impact of too much or too little oil injection of the separator on the oil content of the compressed air, and always keep the oil content of the compressed air below 3ppm;
Lubricating oil filter with accuracy of 10 microns: ensures minimal wear on running parts. Multiple fuel filters protect the reliability of the engine fuel injection system.
Wheel belt chassis can be added
It can be customized as a 4-wheel portable screw air compressor.
Other Product
Water Well Drilling Rig
Drill Truck
Core Drilling Rig
Air compressor
Company Profile
Wanhai Machinery Co., Ltd., situated in HangZhou, ZheJiang , is a reputable manufacturer specializing in the design, development, production, and distribution of top-notch drilling machinery and equipment. Our extensive product range encompasses a variety of drilling rigs, including oil and gas drilling rigs, water well drilling rigs, core drilling rigs, and more, catering to diverse drilling tasks and scenarios. Our unwavering commitment lies in delivering exceptional products and services that are tailored to meet the specific requirements of each customer. We take pride in our dedicated after-sales team, who promptly and effectively address any concerns or issues that may arise, ensuring utmost customer satisfaction.
We eagerly anticipate establishing enduring, reliable, and mutually beneficial relationships with every customer we serve. Should you express interest in our products, please do not hesitate to reach out to us. We assure you that our team will provide you with the necessary information and assistance to make an informed decision.
At Wanhai Machinery Co., Ltd., we prioritize quality and innovation in all aspects of our operations. Our state-of-the-art manufacturing facilities, coupled with our team of experienced professionals, enable us to consistently deliver drilling machinery and equipment of the highest standards. We stay abreast of the latest technological advancements in the industry, ensuring that our products are at the forefront of efficiency and performance. Furthermore, we understand that each drilling project comes with its unique set of challenges and requirements. Therefore, we offer customized solutions to cater to the specific needs of our customers.
Foreign customer
FAQ
1. Are you a trading company or a manufacturer?
We are a professional manufacturer. Our factory mainly produces water well drilling rigs, core drilling rigs, down-the-hole drilling rigs, pile drivers, etc. The products have been exported to hundreds of countries around the world and enjoy a high reputation all over the world.
2.How to inspect the goods?
1) Support customers to come to the factory for on-site inspection.
2) Support customers to designate third-party companies to inspect goods.
3) Support video inspection.
3.How long is your delivery cycle?
1) In the case of stock, we can deliver the machine within 7 days.
2) Under standard production, we can deliver the machine within 15-20 days.
3) In the case of customization, we can deliver the machine within 25-30 days.
4. What’s your terms of payment?
T/T 30% as deposit, and 70% before delivery. We’ll show you the photos of the products and packages before you pay the balance.
| After-sales Service: | Online Technical Services |
|---|---|
| Warranty: | 1 Year |
| Lubrication Style: | Lubricated |
| Cooling System: | Water Cooling |
| Power Source: | Diesel Engine |
| Cylinder Position: | Horizontal |
| Customization: |
Available
|
|
|---|
.webp)
How does variable speed drive technology improve air compressor efficiency?
Variable Speed Drive (VSD) technology improves air compressor efficiency by allowing the compressor to adjust its motor speed to match the compressed air demand. This technology offers several benefits that contribute to energy savings and enhanced overall system efficiency. Here’s how VSD technology improves air compressor efficiency:
1. Matching Air Demand:
Air compressors equipped with VSD technology can vary the motor speed to precisely match the required compressed air output. Traditional fixed-speed compressors operate at a constant speed regardless of the actual demand, leading to energy wastage during periods of lower air demand. VSD compressors, on the other hand, ramp up or down the motor speed to deliver the necessary amount of compressed air, ensuring optimal energy utilization.
2. Reduced Unloaded Running Time:
Fixed-speed compressors often run unloaded during periods of low demand, where they continue to consume energy without producing compressed air. VSD technology eliminates or significantly reduces this unloaded running time by adjusting the motor speed to closely follow the air demand. As a result, VSD compressors minimize energy wastage during idle periods, leading to improved efficiency.
3. Soft Starting:
Traditional fixed-speed compressors experience high inrush currents during startup, which can strain the electrical system and cause voltage dips. VSD compressors utilize soft starting capabilities, gradually ramping up the motor speed instead of instantly reaching full speed. This soft starting feature reduces mechanical and electrical stress, ensuring a smooth and controlled startup, and minimizing energy spikes.
4. Energy Savings at Partial Load:
In many applications, compressed air demand varies throughout the day or during different production cycles. VSD compressors excel in such scenarios by operating at lower speeds during periods of lower demand. Since power consumption is proportional to motor speed, running the compressor at reduced speeds significantly reduces energy consumption compared to fixed-speed compressors that operate at a constant speed regardless of the demand.
5. Elimination of On/Off Cycling:
Fixed-speed compressors often use on/off cycling to adjust the compressed air output. This cycling can result in frequent starts and stops, which consume more energy and cause mechanical wear. VSD compressors eliminate the need for on/off cycling by continuously adjusting the motor speed to meet the demand. By operating at a consistent speed within the required range, VSD compressors minimize energy losses associated with frequent cycling.
6. Enhanced System Control:
VSD compressors offer advanced control capabilities, allowing for precise monitoring and adjustment of the compressed air system. These systems can integrate with sensors and control algorithms to maintain optimal system pressure, minimize pressure fluctuations, and prevent excessive energy consumption. The ability to fine-tune the compressor’s output based on real-time demand contributes to improved overall system efficiency.
By utilizing variable speed drive technology, air compressors can achieve significant energy savings, reduce operational costs, and enhance their environmental sustainability by minimizing energy wastage and optimizing efficiency.
.webp)
What safety precautions should be taken when working with compressed air?
Working with compressed air requires adherence to certain safety precautions to prevent accidents and ensure the well-being of individuals involved. Here are some important safety measures to consider:
1. Personal Protective Equipment (PPE):
Wear appropriate PPE, including safety goggles or a face shield to protect eyes from flying debris or particles, hearing protection to reduce noise exposure, and gloves to safeguard hands from potential hazards.
2. Compressed Air Storage:
Avoid storing compressed air in containers that are not designed for this purpose, such as soda bottles or makeshift containers. Use approved and properly labeled air storage tanks or cylinders that can handle the pressure and are regularly inspected and maintained.
3. Pressure Regulation:
Ensure that the air pressure is regulated to a safe level suitable for the equipment and tools being used. High-pressure air streams can cause serious injuries, so it is important to follow the manufacturer’s recommendations and never exceed the maximum allowable pressure.
4. Air Hose Inspection:
Regularly inspect air hoses for signs of damage, such as cuts, abrasions, or leaks. Replace damaged hoses immediately to prevent potential accidents or loss of pressure.
5. Air Blowguns:
Exercise caution when using air blowguns. Never direct compressed air towards yourself or others, as it can cause eye injuries, hearing damage, or dislodge particles that may be harmful if inhaled. Always point blowguns away from people or any sensitive equipment or materials.
6. Air Tool Safety:
Follow proper operating procedures for pneumatic tools. Ensure that tools are in good working condition, and inspect them before each use. Use the appropriate accessories, such as safety guards or shields, to prevent accidental contact with moving parts.
7. Air Compressor Maintenance:
Maintain air compressors according to the manufacturer’s guidelines. Regularly check for leaks, clean or replace filters, and drain moisture from the system. Proper maintenance ensures the safe and efficient operation of the compressor.
8. Training and Education:
Provide adequate training and education to individuals working with compressed air. Ensure they understand the potential hazards, safe operating procedures, and emergency protocols. Encourage open communication regarding safety concerns and implement a culture of safety in the workplace.
9. Lockout/Tagout:
When performing maintenance or repairs on compressed air systems, follow lockout/tagout procedures to isolate the equipment from energy sources and prevent accidental startup. This ensures the safety of the individuals working on the system.
10. Proper Ventilation:
Ensure proper ventilation in enclosed areas where compressed air is used. Compressed air can displace oxygen, leading to a potential risk of asphyxiation. Adequate ventilation helps maintain a safe breathing environment.
By adhering to these safety precautions, individuals can minimize the risks associated with working with compressed air and create a safer work environment.
.webp)
What is the role of air compressor tanks?
Air compressor tanks, also known as receiver tanks or air receivers, play a crucial role in the operation of air compressor systems. They serve several important functions:
1. Storage and Pressure Regulation: The primary role of an air compressor tank is to store compressed air. As the compressor pumps air into the tank, it accumulates and pressurizes the air. The tank acts as a reservoir, allowing the compressor to operate intermittently while providing a steady supply of compressed air during periods of high demand. It helps regulate and stabilize the pressure in the system, reducing pressure fluctuations and ensuring a consistent supply of air.
2. Condensation and Moisture Separation: Compressed air contains moisture, which can condense as the air cools down inside the tank. Air compressor tanks are equipped with moisture separators or drain valves to collect and remove this condensed moisture. The tank provides a space for the moisture to settle, allowing it to be drained out periodically. This helps prevent moisture-related issues such as corrosion, contamination, and damage to downstream equipment.
3. Heat Dissipation: During compression, air temperature increases. The air compressor tank provides a larger surface area for the compressed air to cool down and dissipate heat. This helps prevent overheating of the compressor and ensures efficient operation.
4. Pressure Surge Mitigation: Air compressor tanks act as buffers to absorb pressure surges or pulsations that may occur during compressor operation. These surges can be caused by variations in demand, sudden changes in airflow, or the cyclic nature of reciprocating compressors. The tank absorbs these pressure fluctuations, reducing stress on the compressor and other components, and providing a more stable and consistent supply of compressed air.
5. Energy Efficiency: Air compressor tanks contribute to energy efficiency by reducing the need for the compressor to run continuously. The compressor can fill the tank during periods of low demand and then shut off when the desired pressure is reached. This allows the compressor to operate in shorter cycles, reducing energy consumption and minimizing wear and tear on the compressor motor.
6. Emergency Air Supply: In the event of a power outage or compressor failure, the stored compressed air in the tank can serve as an emergency air supply. This can provide temporary air for critical operations, allowing time for maintenance or repairs to be carried out without disrupting the overall workflow.
Overall, air compressor tanks provide storage, pressure regulation, moisture separation, heat dissipation, pressure surge mitigation, energy efficiency, and emergency backup capabilities. They are vital components that enhance the performance, reliability, and longevity of air compressor systems in various industrial, commercial, and personal applications.
editor by CX 2023-12-15
China high quality Top Performance Low Noise Permanent Magnet 250kw 5bar Two-Stage Rotary Screw Air Compressor arb air compressor
Product Description
Top Performance Low Noise Permanent Magnet 250kw 5bar Two-stage Rotary Screw Air Compressor
Technical Parameters Of fixed speed screw air compressor:
| Model | Power (kw) |
Air folw/pressure (m3/Bar) |
Outlet size | Noise | Unit weight (KG) |
Unit size (mm) |
|
| WZS-22PMD-2S | 22 | 6.25m³/5Bar | RP1 1/2 | 66±3 | 1350 | 1800x1270x1550 | |
| WZS-30PMD-2S | 30 | 7.2m³/5Bar | RP1 1/2 | 66±3 | 1550 | 1800x1270x1550 | |
| WZS-37PMD-2S | 37 | 10m³/5Bar | RP1 1/2 | 68±3 | 1900 | 1800x1270x1550 | |
| WZS-45PMD-2S | 45 | 12m³/5Bar | RP2 | 68±3 | 2100 | 1800x1270x1550 | |
| WZS-55PMD-2S | 55 | 13.8m³/5Bar | RP2 | 70±3 | 2200 | 2100x1360x1660 | |
| WZS-75PMD-2S | 75 | 18.5m³/5Bar | DN65 | 70±3 | 2800 | 2800x1750x1900 | |
| WZS-90PMD-2S | 90 | 23m³/5Bar | DN65 | 72±3 | 2800 | 2800x1750x1900 | |
| WZS-110PMD-2S | 110 | 28m³/5Bar | DN80 | 72±3 | 3200 | 3200x1750x2250 | |
| WZS-132PMD-2S | 132 | 32.5m³/5Bar | D270N80 | 72±3 | 3500 | 3200x1750x2250 | |
| WZS-160PMD-2S | 160 | 41m³/5Bar | DN125 | 74±3 | 4100 | 3200x1750x2350 | |
| WZS-185PMD-2S | 185 | 45m³/5Bar | DN125 | 74±3 | 4500 | 3800x2150x2250 | |
| WZS-200PMD-2S | 200 | 50m³/5Bar | DN150 | 76±3 | 5100 | 3800x2150x2250 | |
| WZS-220PMD-2S | 220 | 54m³/5Bar | DN150 | 76±3 | 6200 | 3800x2250x2250 | |
| WZS-250PMD-2S | 250 | 61m³/5Bar | DN150 | 78±3 | 6600 | 4200x2250x2400 | |
Before quotation:
1.Before quoting, what should users offer?
1).Discharge pressure (Bar, Mpa or Psi)
2).Air discharge/Air flow/Air capacity (m3/min or CFM)
3).Power supply (220/380V, 50/60Hz, 3Phase)
2.If I don’t know the pressure and air flow, what should I do?
1).Take the picture of nameplate, we will advise the suitable air compressor to you.
2).Tell us what industry you are, we can advise the suitable 1 (so as to air tank / air dryer / air filters).
High Efficiency PM Motor and Energy Saving
*With the high-performance permanent magnet material, PM motor won’t lose magnetism even under 120°c and can run for more than 15 years.
*No motor bearing: permanent magnet rotors is installed directly on the stretch out shaft of Male rotor. This structure doesn’t have the bearing and eliminates the motor bearing fault.
*Comparing to normal variable speed motor, the permanent magnet synchronous motor performs with even better energy efficiency. Especially in the low-speed condition, it can still maintain a high motor efficiency.
SHIPPING
Delivery: time 5-25 working days after payment receipt confirmed(based on actual quantity)
packing:standard export packing. or customized packing as your
Professional: goods shipping forwarder.
FAQ
Q: OEM/ODM, or customers logo printed is available?
Yes, OEM/ODM, customers logo is welcomed.
Q: Delivery date?
Usually 5-25 workdays after receiving deposit, specific delivery date based on order quantity
Q: what’s your payment terms?
Regularly doing 30% deposit and 70% balance by T/T, Western Union, Paypal, other payment terms also can be discussed based on our cooperation.
Q: How to control your quality?
We have professional QC team, control the quality during the mass production and inspect completely goods before shipping.
Q: If we don’t have shipping forwarder in China, would you do this for us?
We can offer you best shipping line to ensure you can get the goods timely at best price.
Q: come to China before, can you be my guide in China?
We are happy to provide you orservice, such as booking ticket, pick up at the airport, booking hotel, accompany visiting market or factory
| After-sales Service: | Video Technical Support |
|---|---|
| Warranty: | Unit 1 Year, Air End 2 Years |
| Lubrication Style: | Oil-less |
| Cooling System: | Air Cooling |
| Power Source: | AC Power |
| Cylinder Position: | Vertical |
| Customization: |
Available
|
|
|---|
Can air compressors be used for shipbuilding and maritime applications?
Air compressors are widely used in shipbuilding and maritime applications for a variety of tasks and operations. The maritime industry relies on compressed air for numerous essential functions. Here’s an overview of how air compressors are employed in shipbuilding and maritime applications:
1. Pneumatic Tools and Equipment:
Air compressors are extensively used to power pneumatic tools and equipment in shipbuilding and maritime operations. Pneumatic tools such as impact wrenches, drills, grinders, sanders, and chipping hammers require compressed air to function. The versatility and power provided by compressed air make it an ideal energy source for heavy-duty tasks, maintenance, and construction activities in shipyards and onboard vessels.
2. Painting and Surface Preparation:
Air compressors play a crucial role in painting and surface preparation during shipbuilding and maintenance. Compressed air is used to power air spray guns, sandblasting equipment, and other surface preparation tools. Compressed air provides the force necessary for efficient and uniform application of paints, coatings, and protective finishes, ensuring the durability and aesthetics of ship surfaces.
3. Pneumatic Actuation and Controls:
Air compressors are employed in pneumatic actuation and control systems onboard ships. Compressed air is used to operate pneumatic valves, actuators, and control devices that regulate the flow of fluids, control propulsion systems, and manage various shipboard processes. Pneumatic control systems offer reliability and safety advantages in maritime applications.
4. Air Start Systems:
In large marine engines, air compressors are used in air start systems. Compressed air is utilized to initiate the combustion process in the engine cylinders. The compressed air is injected into the cylinders to turn the engine’s crankshaft, enabling the ignition of fuel and starting the engine. Air start systems are commonly found in ship propulsion systems and power generation plants onboard vessels.
5. Pneumatic Conveying and Material Handling:
In shipbuilding and maritime operations, compressed air is used for pneumatic conveying and material handling. Compressed air is utilized to transport bulk materials, such as cement, sand, and grain, through pipelines or hoses. Pneumatic conveying systems enable efficient and controlled transfer of materials, facilitating construction, cargo loading, and unloading processes.
6. Air Conditioning and Ventilation:
Air compressors are involved in air conditioning and ventilation systems onboard ships. Compressed air powers air conditioning units, ventilation fans, and blowers, ensuring proper air circulation, cooling, and temperature control in various ship compartments, cabins, and machinery spaces. Compressed air-driven systems contribute to the comfort, safety, and operational efficiency of maritime environments.
These are just a few examples of how air compressors are utilized in shipbuilding and maritime applications. Compressed air’s versatility, reliability, and convenience make it an indispensable energy source for various tasks and systems in the maritime industry.
.webp)
What is the energy efficiency of modern air compressors?
The energy efficiency of modern air compressors has significantly improved due to advancements in technology and design. Here’s an in-depth look at the energy efficiency features and factors that contribute to the efficiency of modern air compressors:
Variable Speed Drive (VSD) Technology:
Many modern air compressors utilize Variable Speed Drive (VSD) technology, also known as Variable Frequency Drive (VFD). This technology allows the compressor motor to adjust its speed according to the compressed air demand. By matching the motor speed to the required airflow, VSD compressors can avoid excessive energy consumption during periods of low demand, resulting in significant energy savings compared to fixed-speed compressors.
Air Leakage Reduction:
Air leakage is a common issue in compressed air systems and can lead to substantial energy waste. Modern air compressors often feature improved sealing and advanced control systems to minimize air leaks. By reducing air leakage, the compressor can maintain optimal pressure levels more efficiently, resulting in energy savings.
Efficient Motor Design:
The motor of an air compressor plays a crucial role in its energy efficiency. Modern compressors incorporate high-efficiency electric motors that meet or exceed established energy efficiency standards. These motors are designed to minimize energy losses and operate more efficiently, reducing overall power consumption.
Optimized Control Systems:
Advanced control systems are integrated into modern air compressors to optimize their performance and energy consumption. These control systems monitor various parameters, such as air pressure, temperature, and airflow, and adjust compressor operation accordingly. By precisely controlling the compressor’s output to match the demand, these systems ensure efficient and energy-saving operation.
Air Storage and Distribution:
Efficient air storage and distribution systems are essential for minimizing energy losses in compressed air systems. Modern air compressors often include properly sized and insulated air storage tanks and well-designed piping systems that reduce pressure drops and minimize heat transfer. These measures help to maintain a consistent and efficient supply of compressed air throughout the system, reducing energy waste.
Energy Management and Monitoring:
Some modern air compressors feature energy management and monitoring systems that provide real-time data on energy consumption and performance. These systems allow operators to identify energy inefficiencies, optimize compressor settings, and implement energy-saving practices.
It’s important to note that the energy efficiency of an air compressor also depends on factors such as the specific model, size, and application. Manufacturers often provide energy efficiency ratings or specifications for their compressors, which can help in comparing different models and selecting the most efficient option for a particular application.
Overall, modern air compressors incorporate various energy-saving technologies and design elements to enhance their efficiency. Investing in an energy-efficient air compressor not only reduces operational costs but also contributes to sustainability efforts by minimizing energy consumption and reducing carbon emissions.
What is the role of air compressor tanks?
Air compressor tanks, also known as receiver tanks or air receivers, play a crucial role in the operation of air compressor systems. They serve several important functions:
1. Storage and Pressure Regulation: The primary role of an air compressor tank is to store compressed air. As the compressor pumps air into the tank, it accumulates and pressurizes the air. The tank acts as a reservoir, allowing the compressor to operate intermittently while providing a steady supply of compressed air during periods of high demand. It helps regulate and stabilize the pressure in the system, reducing pressure fluctuations and ensuring a consistent supply of air.
2. Condensation and Moisture Separation: Compressed air contains moisture, which can condense as the air cools down inside the tank. Air compressor tanks are equipped with moisture separators or drain valves to collect and remove this condensed moisture. The tank provides a space for the moisture to settle, allowing it to be drained out periodically. This helps prevent moisture-related issues such as corrosion, contamination, and damage to downstream equipment.
3. Heat Dissipation: During compression, air temperature increases. The air compressor tank provides a larger surface area for the compressed air to cool down and dissipate heat. This helps prevent overheating of the compressor and ensures efficient operation.
4. Pressure Surge Mitigation: Air compressor tanks act as buffers to absorb pressure surges or pulsations that may occur during compressor operation. These surges can be caused by variations in demand, sudden changes in airflow, or the cyclic nature of reciprocating compressors. The tank absorbs these pressure fluctuations, reducing stress on the compressor and other components, and providing a more stable and consistent supply of compressed air.
5. Energy Efficiency: Air compressor tanks contribute to energy efficiency by reducing the need for the compressor to run continuously. The compressor can fill the tank during periods of low demand and then shut off when the desired pressure is reached. This allows the compressor to operate in shorter cycles, reducing energy consumption and minimizing wear and tear on the compressor motor.
6. Emergency Air Supply: In the event of a power outage or compressor failure, the stored compressed air in the tank can serve as an emergency air supply. This can provide temporary air for critical operations, allowing time for maintenance or repairs to be carried out without disrupting the overall workflow.
Overall, air compressor tanks provide storage, pressure regulation, moisture separation, heat dissipation, pressure surge mitigation, energy efficiency, and emergency backup capabilities. They are vital components that enhance the performance, reliability, and longevity of air compressor systems in various industrial, commercial, and personal applications.
editor by CX 2023-11-13
China OEM 30% Energy Saving Low Noise Industrial VSD Single Rotary Screw Type Air Compressors Price Oil Free Direct Driven Air Compressor 7.5kw 15kw 22kw 37kw 55kw 75kw portable air compressor
Product Description
Brief introduction of factory:
1. We have been engaged in r & D, production and sales of air compressors for 19 years;
2. Our air compressor products through CE,SGS,ISO certification, with more than 20 invention patents;
3. Our products are exported to 132 countries and regions around the world;
4. Our air compressor provides a 5-year warranty.
If you have specific parameters and requirements for our Rotary Screw Type Air Compressor, customization is available
Hot – selling screw air compressor directory
| Model | Air Flow (m³/min) | Motor Power | Noise | Outlet Diameter | Dimension | Weight | ||||
| 7bar | 8bar | 10bar | 13bar | kw | dB | inch | W*D*H (mm) | kg | ||
| YP-10A | 1.1 | 1.0 | 0.85 | 0.7 | 7.5 | 65 | G1” | 960*680*960 | 280 | |
| YP-15A | 1.8 | 1.65 | 1.5 | 1.3 | 11 | 65 | G1” | 1050*830*1240 | 380 | |
| YP-20A | 2.4 | 2.2 | 2.1 | 1.8 | 15 | 68 | G1” | 1050*830*1240 | 380 | |
| YP-25A | 3.1 | 3.0 | 2.7 | 2.3 | 18.5 | 68 | G1” | 1200*830*1290 | 480 | |
| YP-30A | 3.8 | 3.6 | 3.2 | 2.5 | 22 | 68 | G1” | 1200*830*1290 | 480 | |
| YP-40A | 5.3 | 5.0 | 4.3 | 3.6 | 30 | 69 | G11/2” | 1300*1000*1540 | 710 | |
| YP-50A | 6.6 | 6.2 | 5.7 | 4.6 | 37 | 69 | G11/2” | 1300*1000*1540 | 710 | |
| YP-60A | 8.0 | 7.7 | 6.9 | 6.0 | 45 | 70 | G11/2” | 1500*1160*1700 | 990 | |
| YP-75A | 10.5 | 9.8 | 8.7 | 7.3 | 55 | 70 | G11/2” | 1500*1160*1700 | 990 | |
| YP-100A | 13.6 | 13.0 | 11.3 | 10.1 | 75 | 72 | G2” | 1700*1180*1800 | 1300 | |
| YP-125A | 16.2 | 15.4 | 13.2 | 11.2 | 90 | 72 | DN50 | 1850*1200*1900 | 1400 | |
| YP-150A | 20.8 | 19.5 | 16.5 | 13.7 | 110 | 73 | DN65 | 2250*1260*2055 | 1560 | |
Product Description
Promises Every Machine Will Run Well More Than 15 Years
Brief Introduction:
Air end: Germany Technology. 30 years designed lifetime.
Motor: 100% rare earth permanent magnet motor.
Inverter: Chinese No. 1 inverter can save 30% energy.
Warranty: 5 years for the air end, and 2 years for the whole compressor.
Delivery time: 7-15 days.
After-sales service:we have our professional after-sales technician to instruct the installation of the whole screw air compressor.
Certificate: CE/ISO9001/ASME
We offer free pipe and valves for installation and installation diagram
| Screw Air Compressor Main Configuration | ||
| Item | Parts | Brand |
| 1 | Air end | Hanbell /BAOSI/GU Air End (Germany origin) |
| 2 | Intake Valve | Red star(Chian) |
| 3 | Solenoid Valve | CEME (Italy) |
| 4 | Temperature sensor | Red star (China) |
| 5 | Pressure sensor | Huba original (from Switzerland) |
| 6 | Motor | Jiangtian Motor( China) |
| 7 | Coupling | Germany KTR |
| 8 | Thermostat Valve | Italy VMC |
| 9 | PLC | MAM6080 MAM880 MAM860 |
| 10 | Minimal Pressure Valve | Red star(Chian) |
| 11 | Air filter element | Germany MANN |
| 12 | Oil filter element | Germany MANN |
| 13 | Oil separator element | Germany MANN |
| 14 | Bearing | Sweden SKF |
Advantages
1.New generation of highly efficient imported host machine
2.Highly efficient permanent magnetic motor
3.SKF bearing
4.Highly efficient magnetic steel of permanent magnetic motor
5.Intelligent microcomputer control system
6.Energy-saving air inlet control system
7.Highly efficient cooling system
8.Highly efficient professional filtering syste
Detailed Photos
OUR TEAM
Certifications
1. CE;
2. SGS;
3. ISO9001;
4. 12 patents for screw compressor.
QC Management
Re-factory quality control process:
1.Installation inspection of the whole air compressor: check and confirm the whole machine according to the operation instructions and quality control standards. Main inspection items:
A . Confirm the nose and motor nameplates;
B . Check whether there is oil leakage in the pipeline and oil circuit of the air compressor; C . the air compressor machine screw locking inspection..
2. Rotary screw type air compressor factory test machine, heat engine: test whether the air compressor operation parameters meet the requirements of customers, including voltage, current, working pressure, exhaust volume, etc.Air compressor factory before 48 hours of thermal test, stability confirmation.
3. 24 hours online after-sales service, one-to-1 online guidance installation, debugging, troubleshooting.
Product Case
Use case of rotary screw type air compressor
1. Rotary Screw type air compressors are exported to 132 countries and regions all over the world;
2. All indicators of screw air compressor are stable and the failure rate is low;
3. Perfect after-sales service system, engineers on duty 24 hours a day to provide one-on-1 service to customers at the air compressor use site.
Packaging & Shipping
Rotary Screw type Air compressor packing method
1. Screw air compressor packaging is divided into 3 layers from inside to outside:
1) The first layer of protection: spray paint on the surface of the machine to protect the surface of the machine. The fouling pull film is wrapped around the surface of the machine to protect the surface of the paint.
2) The second layer of protection: anti-collision protection of the machine. On the basis of lacquer protection, anti-collision buffer cotton is used to protect the machine against collision.
3) The third layer of protection: the case adopts the overall packaging of the non-fumigation wooden case to protect the machine during transportation.
F.A.Q
Q1. Why do customers choose us?
Yunshun Electric Machinery Co., Ltd. is a company specializing in screw air compressor for 18 years since 2001. Our
German Standard production line helps us get the affirmation from our agents as well as end-user clients.
Q2. Are you a manufacturer or trading company?
We are a professional manufacturer with big modern factory in HangZhou,China.
Both OEM & ODM service can be accepted.
Q3. What’s your delivery time?
Generally 7-10 days, if urgent order, we can arrange, too.
Q4. How long is your air compressor warranty?
2 years for the whole machine and 5years for screw air end, except consumable spare parts.
Q5. How long could your air compressor be used for?
At least 10 years.
Q6. What’s payment term?
T/T, L/C, Western Union, Credit Card, and etc.
Q7. How about your customer service?
24 hours on-line service for all our clients.
Q8. How about your after-sales service?
1. Providing customers with installation online instructions.
2. Well-trained engineers available to overseas service.
3. PlHangZhou for oversea after-sales supporting company.
| After-sales Service: | 5 Years for The Air End, and 2 Years for The Whole |
|---|---|
| Warranty: | 2 Years |
| Lubrication Style: | Lubricated |
| Cooling System: | Air Cooling |
| Power Source: | AC Power |
| Cylinder Position: | Vertical |
| Customization: |
Available
|
|
|---|
Can air compressors be used for painting and sandblasting?
Yes, air compressors can be used for both painting and sandblasting applications. Here’s a closer look at how air compressors are utilized for painting and sandblasting:
Painting:
Air compressors are commonly used in painting processes, especially in automotive, industrial, and construction applications. Here’s how they are involved:
- Spray Guns: Air compressors power spray guns used for applying paint coatings. The compressed air atomizes the paint, creating a fine mist that can be evenly sprayed onto surfaces. The pressure and volume of the compressed air impact the spray pattern, coverage, and overall finish quality.
- Paint Mixers and Agitators: Compressed air is often used to power mixers and agitators that ensure proper blending of paint components. These devices use the compressed air to stir or circulate the paint, preventing settling and maintaining a consistent mixture.
- Airbrushing: Air compressors are essential for airbrushing techniques, which require precise control over airflow and pressure. Airbrushes are commonly used in artistic applications, such as illustrations, murals, and fine detailing work.
Sandblasting:
Air compressors play a crucial role in sandblasting operations, which involve propelling abrasive materials at high velocity to clean, etch, or prepare surfaces. Here’s how air compressors are used in sandblasting:
- Blasting Cabinets: Air compressors power blasting cabinets or booths, which are enclosed spaces where the sandblasting process takes place. The compressed air propels the abrasive media, such as sand or grit, through a nozzle or gun, creating a forceful stream that impacts the surface being treated.
- Abrasive Blasting Pots: Air compressors supply air to abrasive blasting pots or tanks that store and pressurize the abrasive media. The compressed air from the compressor enters the pot, pressurizing it and allowing for a controlled release of the abrasive material during the sandblasting process.
- Air Dryers and Filters: In sandblasting applications, it is crucial to have clean, dry air to prevent moisture and contaminants from affecting the abrasive blasting process and the quality of the surface being treated. Air compressors may be equipped with air dryers and filters to remove moisture, oil, and impurities from the compressed air.
When using air compressors for painting or sandblasting, it is important to consider factors such as the compressor’s pressure and volume output, the specific requirements of the application, and the type of tools or equipment being used. Consult the manufacturer’s guidelines and recommendations to ensure the air compressor is suitable for the intended painting or sandblasting tasks.
Proper safety measures, such as wearing protective gear and following established protocols, should always be followed when working with air compressors for painting and sandblasting applications.
Can air compressors be used for inflating tires and sporting equipment?
Yes, air compressors can be used for inflating tires and sporting equipment, providing a convenient and efficient method for achieving the desired air pressure. Here’s how air compressors are used for these purposes:
1. Tire Inflation:
Air compressors are commonly used for inflating vehicle tires, including car tires, motorcycle tires, bicycle tires, and even larger truck or trailer tires. Air compressors provide a continuous source of pressurized air, allowing for quick and accurate inflation. They are often used in automotive repair shops, gas stations, and by individuals who regularly need to inflate tires.
2. Sporting Equipment Inflation:
Air compressors are also useful for inflating various types of sporting equipment. This includes inflatable balls such as soccer balls, basketballs, footballs, and volleyballs. Additionally, air compressors can be used to inflate inflatable water toys, air mattresses, inflatable kayaks, and other recreational items that require air for proper inflation.
3. Air Tools for Inflation:
Air compressors can power air tools specifically designed for inflation purposes. These tools, known as inflators or air blow guns, provide controlled airflow for inflating tires and sporting equipment. They often have built-in pressure gauges and nozzles designed to fit different types of valves, making them versatile and suitable for various inflation tasks.
4. Adjustable Pressure:
One advantage of using air compressors for inflation is the ability to adjust the pressure. Most air compressors allow users to set the desired pressure level using a pressure regulator or control knob. This feature ensures that tires and sporting equipment are inflated to the recommended pressure, promoting optimal performance and safety.
5. Efficiency and Speed:
Air compressors provide a faster and more efficient inflation method compared to manual pumps. The continuous supply of compressed air allows for quick inflation, reducing the time and effort required to inflate tires and sporting equipment manually.
6. Portable Air Compressors:
For inflating tires and sporting equipment on the go, portable air compressors are available. These compact and lightweight compressors can be easily carried in vehicles or taken to sports events and outdoor activities, ensuring convenient access to a reliable air supply.
It is important to note that when using air compressors for inflating tires, it is recommended to follow manufacturer guidelines and proper inflation techniques to ensure safety and avoid overinflation.
In which industries are air compressors widely used?
Air compressors find extensive usage across various industries due to their versatility and ability to generate compressed air. Here are some industries where air compressors are widely employed:
1. Manufacturing: Air compressors are essential in manufacturing processes for powering pneumatic tools and equipment. They are used for tasks such as operating assembly lines, powering robotic machinery, running paint sprayers, and driving pneumatic actuators.
2. Construction: Air compressors play a crucial role in the construction industry. They power pneumatic tools like jackhammers, nail guns, impact wrenches, and concrete breakers. Compressed air is also used for concrete spraying, sandblasting, and operating air-powered lifts and hoists.
3. Automotive: Air compressors are widely used in automotive manufacturing and repair. They power air tools used in auto body shops, tire inflation equipment, pneumatic lifts, and air-operated brake systems. Compressed air is also utilized in vehicle painting and drying processes.
4. Oil and Gas: The oil and gas industry extensively relies on air compressors for various applications. They are used for pneumatic drilling, powering pneumatic tools in refineries and petrochemical plants, operating pneumatic valves and actuators, and providing instrument air for control systems.
5. Food and Beverage: Air compressors are employed in the food and beverage industry for tasks such as packaging, bottling, and sealing. They power pneumatic conveying systems, control air pressure in food processing equipment, and provide clean compressed air for food handling and storage.
6. Pharmaceutical and Healthcare: Air compressors find application in pharmaceutical manufacturing and healthcare facilities. They are used for operating medical equipment, such as ventilators and dental tools. Compressed air is also utilized in pharmaceutical processes, including tablet coating, fluid bed drying, and aseptic packaging.
7. Aerospace: The aerospace industry relies on air compressors for various applications, including aircraft maintenance and assembly. They power pneumatic tools for aircraft repair, provide compressed air for cleaning and pressurizing systems, and support ground operations, such as tire inflation and aircraft de-icing.
8. Mining: Air compressors are extensively used in the mining industry. They power pneumatic tools for drilling, rock blasting, and excavation. Compressed air is also utilized for ventilation, conveying materials, and operating underground equipment.
9. Energy and Utilities: Air compressors play a vital role in the energy and utilities sector. They are used in power generation plants for pneumatic control systems, instrument air, and operating pneumatic valves. Compressed air is also employed for cleaning and maintenance purposes.
These are just a few examples of the industries where air compressors are widely utilized. The versatility and reliability of air compressors make them indispensable in numerous applications across diverse sectors.
editor by CX 2023-11-10
China Custom Portable Mini Direct-Coupled Car Air Compressor Low Noise small air compressor
Product Description
Production Description
Air compressor(Direct-coupled):
Usage: drilling machine, pneumatic tools, vehicle braking, doors and windows open and close by, textile machinery, tire inflation, mining compressors, marine compressors, sand blasting, spray painting
Performance Low Noise
*highly reliable and durable valve
*The overall strength aluminum alloy body, light and heat
*Motor delivers reliable power, low-voltage start running performance
*Powerful fan cooled motor and body simultaneously
* Special shock absorber design
*dual exhaust nozzles. Are used to direct the exhaust vent and pressure regulator
*with sliding button pressure switch, convenient and safe
Specification
|
Model |
GM47L-1 |
|
Pressure |
0.7Mpa |
|
Exhaust volune |
0.12m3/min |
|
Motor |
1.5KW/2HP |
|
Cylinder |
47mm ×1 |
|
Storage tank |
24L |
|
Size |
60×31×58cm |
|
Weight |
27Kg |
|
Model |
GM47L-2 |
|
Pressure |
0.7Mpa |
|
Exhaust volune |
0.12m3/min |
|
Motor |
1.5KW/2HP |
|
Cylinder |
47mm ×1 |
|
Storage tank |
24L |
|
Size |
60×31×58cm |
|
Weight |
27Kg |
|
Model |
GM47L-3 |
|
Pressure |
0.7Mpa |
|
Exhaust volune |
0.12m3/min |
|
Motor |
1.5KW/2HP |
|
Cylinder |
47mm ×1 |
|
Storage tank |
24L |
|
Size |
60×31×58cm |
|
Weight |
27Kg |
|
Model |
GM5718-2 |
|
Pressure |
0.7Mpa |
|
Exhaust volune |
0.10m3/min |
|
Motor |
0.75KW/1HP |
|
Cylinder |
42mm ×1 |
|
Storage tank |
6L |
|
Size |
47×21×47cm |
|
Weight |
21Kg |
|
Model |
GM5718-3 |
|
Pressure |
0.7Mpa |
|
Exhaust volune |
0.10m3/min |
|
Motor |
0.75KW/1HP |
|
Cylinder |
42mm ×1 |
|
Storage tank |
6L |
|
Size |
47×21×47cm |
|
Weight |
21Kg |
|
Model |
GM0302 |
|
Pressure |
0.7Mpa |
|
Exhaust volune |
0.20m3/min |
|
Motor |
2.2KW/3HP |
|
Cylinder |
42mm ×2 |
|
Storage tank |
30L |
|
Size |
63×42×61cm |
|
Weight |
36Kg |
|
Model |
GMW0301 |
|
Pressure |
0.7Mpa |
|
Exhaust volune |
0.14m3/min |
|
Motor |
1.875KW/2.5HP |
|
Cylinder |
41mm *1 |
|
Storage tank |
35L |
|
Size |
70×30×58cm |
|
Weight |
32Kg |
|
Model |
GMW0305 |
|
Pressure |
0.7Mpa |
|
Exhaust volune |
0.12m3/min |
|
Motor |
1.5KW/2.5HP |
|
Cylinder |
47mm *1 |
|
Storage tank |
50L |
|
Size |
80×32×67cm |
|
Weight |
37Kg |
|
Model |
GMW2571 |
|
Pressure |
0.7Mpa |
|
Exhaust volune |
0.198m3/min |
|
Motor |
1.5KW/2HP |
|
Cylinder |
61mm *1 |
|
Storage tank |
25L |
|
Size |
60×30×59cm |
|
Weight |
24Kg |
| Lubrication Style: | Lubricated |
|---|---|
| Cooling System: | Air Cooling |
| Cylinder Arrangement: | Balanced Opposed Arrangement |
| Cylinder Position: | Angular |
| Structure Type: | Closed Type |
| Compress Level: | Multistage |
| Customization: |
Available
|
|
|---|
Can air compressors be used for shipbuilding and maritime applications?
Air compressors are widely used in shipbuilding and maritime applications for a variety of tasks and operations. The maritime industry relies on compressed air for numerous essential functions. Here’s an overview of how air compressors are employed in shipbuilding and maritime applications:
1. Pneumatic Tools and Equipment:
Air compressors are extensively used to power pneumatic tools and equipment in shipbuilding and maritime operations. Pneumatic tools such as impact wrenches, drills, grinders, sanders, and chipping hammers require compressed air to function. The versatility and power provided by compressed air make it an ideal energy source for heavy-duty tasks, maintenance, and construction activities in shipyards and onboard vessels.
2. Painting and Surface Preparation:
Air compressors play a crucial role in painting and surface preparation during shipbuilding and maintenance. Compressed air is used to power air spray guns, sandblasting equipment, and other surface preparation tools. Compressed air provides the force necessary for efficient and uniform application of paints, coatings, and protective finishes, ensuring the durability and aesthetics of ship surfaces.
3. Pneumatic Actuation and Controls:
Air compressors are employed in pneumatic actuation and control systems onboard ships. Compressed air is used to operate pneumatic valves, actuators, and control devices that regulate the flow of fluids, control propulsion systems, and manage various shipboard processes. Pneumatic control systems offer reliability and safety advantages in maritime applications.
4. Air Start Systems:
In large marine engines, air compressors are used in air start systems. Compressed air is utilized to initiate the combustion process in the engine cylinders. The compressed air is injected into the cylinders to turn the engine’s crankshaft, enabling the ignition of fuel and starting the engine. Air start systems are commonly found in ship propulsion systems and power generation plants onboard vessels.
5. Pneumatic Conveying and Material Handling:
In shipbuilding and maritime operations, compressed air is used for pneumatic conveying and material handling. Compressed air is utilized to transport bulk materials, such as cement, sand, and grain, through pipelines or hoses. Pneumatic conveying systems enable efficient and controlled transfer of materials, facilitating construction, cargo loading, and unloading processes.
6. Air Conditioning and Ventilation:
Air compressors are involved in air conditioning and ventilation systems onboard ships. Compressed air powers air conditioning units, ventilation fans, and blowers, ensuring proper air circulation, cooling, and temperature control in various ship compartments, cabins, and machinery spaces. Compressed air-driven systems contribute to the comfort, safety, and operational efficiency of maritime environments.
These are just a few examples of how air compressors are utilized in shipbuilding and maritime applications. Compressed air’s versatility, reliability, and convenience make it an indispensable energy source for various tasks and systems in the maritime industry.
How do you maintain proper air quality in compressed air systems?
Maintaining proper air quality in compressed air systems is essential to ensure the reliability and performance of pneumatic equipment and the safety of downstream processes. Here are some key steps to maintain air quality:
1. Air Filtration:
Install appropriate air filters in the compressed air system to remove contaminants such as dust, dirt, oil, and water. Filters are typically placed at various points in the system, including the compressor intake, aftercoolers, and before point-of-use applications. Regularly inspect and replace filters to ensure their effectiveness.
2. Moisture Control:
Excessive moisture in compressed air can cause corrosion, equipment malfunction, and compromised product quality. Use moisture separators or dryers to remove moisture from the compressed air. Refrigerated dryers, desiccant dryers, or membrane dryers are commonly employed to achieve the desired level of dryness.
3. Oil Removal:
If the compressed air system utilizes oil-lubricated compressors, it is essential to incorporate proper oil removal mechanisms. This can include coalescing filters or adsorption filters to remove oil aerosols and vapors from the air. Oil-free compressors eliminate the need for oil removal.
4. Regular Maintenance:
Perform routine maintenance on the compressed air system, including inspections, cleaning, and servicing of equipment. This helps identify and address any potential issues that may affect air quality, such as leaks, clogged filters, or malfunctioning dryers.
5. Air Receiver Tank Maintenance:
Regularly drain and clean the air receiver tank to remove accumulated contaminants, including water and debris. Proper maintenance of the tank helps prevent contamination from being introduced into the compressed air system.
6. Air Quality Testing:
Periodically test the quality of the compressed air using appropriate instruments and methods. This can include measuring particle concentration, oil content, dew point, and microbial contamination. Air quality testing provides valuable information about the effectiveness of the filtration and drying processes and helps ensure compliance with industry standards.
7. Education and Training:
Educate personnel working with compressed air systems about the importance of air quality and the proper procedures for maintaining it. Provide training on the use and maintenance of filtration and drying equipment, as well as awareness of potential contaminants and their impact on downstream processes.
8. Documentation and Record-Keeping:
Maintain accurate records of maintenance activities, including filter replacements, drying system performance, and air quality test results. Documentation helps track the system’s performance over time and provides a reference for troubleshooting or compliance purposes.
By implementing these practices, compressed air systems can maintain proper air quality, minimize equipment damage, and ensure the integrity of processes that rely on compressed air.
How does an air compressor work?
An air compressor works by using mechanical energy to compress and pressurize air, which is then stored and used for various applications. Here’s a detailed explanation of how an air compressor operates:
1. Air Intake: The air compressor draws in ambient air through an intake valve or filter. The air may pass through a series of filters to remove contaminants such as dust, dirt, and moisture, ensuring the compressed air is clean and suitable for its intended use.
2. Compression: The intake air enters a compression chamber, typically consisting of one or more pistons or a rotating screw mechanism. As the piston moves or the screw rotates, the volume of the compression chamber decreases, causing the air to be compressed. This compression process increases the pressure and reduces the volume of the air.
3. Pressure Build-Up: The compressed air is discharged into a storage tank or receiver where it is held at a high pressure. The tank allows the compressed air to be stored for later use and helps to maintain a consistent supply of compressed air, even during periods of high demand.
4. Pressure Regulation: Air compressors often have a pressure regulator that controls the output pressure of the compressed air. This allows the user to adjust the pressure according to the requirements of the specific application. The pressure regulator ensures that the compressed air is delivered at the desired pressure level.
5. Release and Use: When compressed air is needed, it is released from the storage tank or receiver through an outlet valve or connection. The compressed air can then be directed to the desired application, such as pneumatic tools, air-operated machinery, or other pneumatic systems.
6. Continued Operation: The air compressor continues to operate as long as there is a demand for compressed air. When the pressure in the storage tank drops below a certain level, the compressor automatically starts again to replenish the compressed air supply.
Additionally, air compressors may include various components such as pressure gauges, safety valves, lubrication systems, and cooling mechanisms to ensure efficient and reliable operation.
In summary, an air compressor works by drawing in air, compressing it to increase its pressure, storing the compressed air, regulating the output pressure, and releasing it for use in various applications. This process allows for the generation of a continuous supply of compressed air for a wide range of industrial, commercial, and personal uses.
editor by CX 2023-10-31